HP Surestore 64 HP Surestore Director FC-64 SNMP Support Manual - Page 41

Operation: F_Port Physical Level Table The Fcfportphstable displays the physical level status and parameters for each F_Port in the fabric element. Table 2-17 Operation: F_Port Physical Level Variable Provides: ModuleIndex FxPortIndex AdminStatus OperStatus Module index. Port index. Desired state of the F_Port. The testing (3) state indicates no operational frames can be passed. When a fabric element initializes, all F_Ports start with fcFPortPhysAdminStatus in the offline (2) state. As the result of either explicit management action or per-configuration information accessible by the fabric element, fcFPortPhysAdminStatus is then changed to either the online (1) or testing (3) states or remains in the offline (2) state. Operational status of the F_Port. The testing (3) state indicates no operational frames can be passed. If fcFPortPhysAdminStatus is offline (2), then fcFPortPhysOperStatus should be offline (2). If fcFPortPhysAdminStatus is changed to online (1) then fcFPortPhysOperStatus should change to online (1). If the F_Port is ready to accept a fabric login request from the attached N_Port, it should proceed and remain in the link-failure (4) state if, and only if, there is a fault that prevents it from going to the online (1) state. LastChange R_T_TOV Value of sysUpTime at the time the F_Port entered its operational status. A value of zero indicates the F Port's operational status has not changed since the agent last started. Receiver_Transmitter Timeout value of the F_Port used by the receiver logic to detect loss of synchronization. Operation: Fabric Login Table The Fcflogintable displays the service parameters for each F_Port in the fabric element that have been established from the most recent fabric login (implicit or explicit). Table 2-18 Operation: Fabric Login Variable Provides: fcFxlogiModuleIndex Module index. fcFxlogiFxPortIndex Port index. fcFxlogiNxPortIndex Node port index. Director SNMP support 35