HP Surestore 64 HP Surestore Director FC-64 SNMP Support Manual - Page 35
SNMP Trap Registration Group, Trap Registration Table, and the setting of the trapRegFilter object.
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
SNMP Trap Registration Group The trap registration group allows for the control of trap generation on the HP EFC Server SNMP agent. The group consists of two scalar objects and a trap registration table. Table 2-10 SNMP Trap Registration Group Object trapMaxClients trapClientCount Provides The maximum number of trap recipients is returned. For the director this value is a constant 12. The current number of trap recipients is returned. Trap Registration Table This table contains a row for each trap recipient. When the SNMP agent generates a trap a copy is sent to each of the recipients in the table depending upon the severity of the trap and the setting of the trapRegFilter object. Table 2-11 Trap Registration Table Object trapRegIpAddress trapRegPort TrapRegFilter Read/write TrapRegRowState Read/write Provides The IP address of the trap recipient. This table is indexed by this object and by trapRegPort The UDP port number of the trap recipient. This value defines the trap severity filter for this trap recipient. The agent will send traps to this host that have a severity level less than or equal to this value. The default value of this object is warning(6). On read operations rowInactive(2) or rowActive(3) is returned. Write operations are supported. RowDestroy(1) causes the trap recipient to be removed from the table. RowInactive(2) causes the sending of traps to the recipient to be suspended. RowActive(3) causes a trap recipient that had previously been set to inactive to become active again. Director SNMP support 29