HP Surestore 64 HP Surestore Director FC-64 SNMP Support Manual - Page 44

The configuration table displays the configuration parameters of the F_Ports., Table 2-20

Get HP Surestore 64 - Director Switch PDF manuals and user guides View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

The configuration table displays the configuration parameters of the F_Ports. Table 2-20 Configuration Table Variable ModuleIndex Provides: Module index. FxPortIndex Name FC-PHVersHigh FC-PHVersLow Port index. Name identifier of the F_Port. Each F_Port has a unique port name in the address space of the fabric. Highest or most recent version of FC-PH that the F_Port is configured to support. Lowest or earliest version of FC-PH that the F Port is configured to support. BBCredit RxBufferSize Total number of receive buffers available for holding a class 1 connect-request, or class 2 or 3 frames from the attached N_Port. It is for buffer-to-buffer flow control in the direction from the attached N_Port (if applicable) to the F_Port. Largest Data_Field size (in octets) for an FT 1 frame that can be received by the F_Port. R_A_TOV E_D_TOV ClassSvcSupt IntermixSupt Resource allocation time out value configured for the F_Port. This is used as the timeout value for determining when to reuse an N_Port resource such as a Recovery_Qualifier. It represents E_D_TOV (see next variable) plus twice the maximum time a frame may be delayed within the fabric and still be delivered. Error detect time out value configured for the F_Port. The Error_Detect_Timeout Value is used as the timeout value for detecting an error condition. Value indicating the set of classes of service supported by the F_Port. Flag indicating if the F_Port supports an intermixed dedicated connection. The flag is always at no(2). StackedConMode Value indicating the mode of stacked connect supported by the F_Port. The value is always at none(1). C2SeqDelivery Flag indicating if class 2 sequential delivery is supported by the F_Port. C3SeqDelivery Flag indicating if class 3 sequential delivery is supported by the F_Port. HoldTime Maximum time (in microseconds) the F_Port holds a frame before discarding the undeliverable frame. The value 0 means that the F_Port does not support this parameter. BaudRate FC-0 baud rate of the F_Port. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
38
±±±±±±±±)LEUH±&KDQQHO±)DEULF±(OHPHQW±0,%±6XSSRUW
The configuration table displays the configuration parameters of the F_Ports.
Table 2-20
Configuration Table
Variable
Provides:
ModuleIndex
Module index.
FxPortIndex
Port index.
Name
Name identifier of the F_Port. Each F_Port has a unique port name in the address space of the
fabric.
FC-PHVersHigh
Highest or most recent version of FC-PH that the F_Port is configured to support.
FC-PHVersLow
Lowest or earliest version of FC-PH that the F Port is configured to support.
BBCredit
Total number of receive buffers available for holding a class 1 connect-request, or class 2 or 3
frames from the attached N_Port. It is for buffer-to-buffer flow control in the direction from the
attached N_Port (if applicable) to the F_Port.
RxBufferSize
Largest Data_Field size (in octets) for an FT 1 frame that can be received by the F_Port.
R_A_TOV
Resource allocation time out value configured for the F_Port. This is used as the timeout value
for determining when to reuse an N_Port resource such as a Recovery_Qualifier. It represents
E_D_TOV (see next variable) plus twice the maximum time a frame may be delayed within the
fabric and still be delivered.
E_D_TOV
Error detect time out value configured for the F_Port. The Error_Detect_Timeout Value is used
as the timeout value for detecting an error condition.
ClassSvcSupt
Value indicating the set of classes of service supported by the F_Port.
IntermixSupt
Flag indicating if the F_Port supports an intermixed dedicated connection. The flag is always at
no(2).
StackedConMode
Value indicating the mode of stacked connect supported by the F_Port. The value is always at
none(1).
C2SeqDelivery
Flag indicating if class 2 sequential delivery is supported by the F_Port.
C3SeqDelivery
Flag indicating if class 3 sequential delivery is supported by the F_Port.
HoldTime
Maximum time (in microseconds) the F_Port holds a frame before discarding the undeliverable
frame. The value 0 means that the F_Port does not support this parameter.
BaudRate
FC-0 baud rate of the F_Port.