HP W2338h User's Guide 2309p, 2509p LCD Display - Page 28

Operating the Monitor Icon Main Menu Options Management (continued) Source Control Information Factory Reset Submenu Options DDC/CI Support Bezel Power LED Sleep Timer DVI HDMI VGA Default Source Auto-Switch Source Current Settings Recommended Settings Serial Number FW Version Backlight Hours Service Support Description (Continued) Allows the computer to control some OSD menu features such as brightness, contrast, and color temperature. Set to: On Off The factory default is On. Turns the light (LED) in the power button On and Off. When set to Off, the light will remain off at all times. Provides the timer-adjustment menu options: Set Current Time - Sets the current time in hours and minutes. Set Sleep Time - Sets the time you want to place the monitor in sleep mode. Set on Time - Sets the time you want the monitor to wake up from sleep mode. Timer - Sets the Sleep Timer feature On or Off; the default setting is Off. Sleep Now - Immediately sets the monitor to enter sleep mode. Selects the default video input signal when the monitor is connected to two active and valid video sources. The default is DVI. You must restart the computer to have the change take effect. Video input signal comes from DVI. Video input signal comes from HDMI. Video input signal comes from VGA. DVI HDMI VGA The factory default is DVI. On Off The factory default is On. Selects and displays important information about the monitor. Provides the current input video mode. Provides the recommended resolution mode and refresh rate for the monitor. Reports the serial number of the monitor. The serial number is needed if contacting HP technical support. Reports the firmware version of the monitor. Reports the total hours of backlight operation. For service support, go to: http://www.hp.com/support Returns settings to factory defaults. 4-6 Features may vary by model. User's Guide