HP XP P9500 Hitachi Dynamic Link Manager Software User Guide for VMWare (HIT52 - Page 130

The DLMgetras Utility for Collecting HDLM Error Information This utility collects information that is needed to analyze HDLM errors that have occurred: information such as integrated trace files, trace files, definition files, and OS information. Whenever the host is restarted, some of the information that is collected by the DLMgetras utility will be cleared. As a result, whenever an error occurs, immediately execute this utility to avoid losing any valuable information. Format Execute this utility from the remote management client, in the following format: DLMgetras {-s host-name -u user-name -p password [folder-to-whichcollected-information-is-output] [-eventlogtime yyyy/mm/dd | eventlogsize {all | maximum-file-length}] | -h} You can also use lower-case characters as follows: dlmgetras {-s host-name -u user-name -p password [folder-to-whichcollected-information-is-output] [-eventlogtime yyyy/mm/dd | eventlogsize {all | maximum-file-length}] | -h} Parameters host-name Specify the host name for which to collect error information. user-name Specify the user name used to log in to the host. password Specify the password used to log in to the host. folder-to-which-collected-information-is-output Specify the output folder for the information that is to be collected by the DLMgetras utility. The output-destination folders shown in Table 7-1 List of Error Information Collected by the DLMgetras Utility for Collecting Error Information on page 7-3 are created in a folder of your choosing, and the information is then stored in the output-destination folders. -eventlogtime yyyy/mm/dd The utility obtains logs from each application, system, and security event log. The logs obtained are those output after 00:00 on the date yyyy/ mm/dd. Specify the date in the yyyy/mm/dd format. -eventlogsize {all | maximum-file-length} all 7-2 Utility Reference Hitachi Dynamic Link Manager User Guide (for VMware(R))