HP XP P9500 Hitachi Dynamic Link Manager Software User Guide for VMWare (HIT52 - Page 89
AutoPATH_ID, HBA-port-WWN, pathid, offline, PathName
View all HP XP P9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
>dlnkmgr offline -cha -pathid 000001 KAPL01055-I All the paths which pass the specified CHA port will be changed to the Offline(C) status. Is this OK? [y/n]:y KAPL01056-I If you are sure that there would be no problem when all the paths which pass the specified CHA are placed in the Offline(C) status, enter y. Otherwise, enter n. [y/n]: KAPL01061-I 2 path(s) were successfully placed Offline(C); 0 path(s) were not. Operation name = offline > -pathid AutoPATH_ID Use this parameter to place a single path offline. Specify the current AutoPATH_ID of the target path, which is displayed by using the view operation. For details about the view operation, see view (Displays Information) on page 6-22. Leading zeros can be omitted (000001 and 1 indicate the same AutoPATH_ID); however, when the target AutoPATH_ID is 000000, enter 000000 or 0 for the parameter value. AutoPATH_IDs are re-assigned every time the host is restarted. Always make sure that you use the view operation to find the current AutoPATH_ID of the target path, before executing the offline operation. -hbaportwwn HBA-port-WWN Use this parameter to place offline all the paths connected to an HBA port associated with a specific HBA port WWN. Only one set of values can be specified for the -hbaportwwn parameter. For HBA-port-WWN, specify the value of HBAPortWWN. The parameter is not case sensitive. To display HBAPortWWN and PathName, execute the view operation as follows: >dlnkmgr view -path -hbaportwwn For details on how to execute the view operation and display the HBA port WWN and path name, see To display path information on page 6-29 in Parameters (To display program information) on page 6-24. Example The following shows an example of placing offline the paths for which the HBA port WWN is 10000000C93213BA while confirming command operation. >dlnkmgr offline -path -hbaportwwn 10000000C93213BA KAPL01052-I The currently selected paths will be changed to the Offline(C) status. Is this OK? [y/n]: y KAPL01053-I If you are sure that there would be no problem when the path is placed in the Offline(C) status, enter y. Otherwise, enter n. [y/n]: y KAPL01061-I 1 path(s) were successfully placed Offline(C); 0 path(s) were not. Operation name = offline Command Reference 6-9 Hitachi Dynamic Link Manager User Guide (for VMware(R))