Home » HP Manuals » Desktops » HP t310 » Manual Viewer

HP t310 Using PCoIP Host Cards with VMware View - Page 19

Apply, Connect

Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Using PCoIP Host Cards w ith VMw are View 8. Click Apply. The VMware View logo should appear on the OSD Connect screen of the zero client. TER0911004 Issue 2 20

Section	Page
Revision History	3
Definitions	6
1 Overview	8
1.1 Additional Resources	8
2 Prerequisites	10
2.1 Installing VMware View 5 or Later	10
2.2 Setting up the PCoIP Host Card and Zero Client	10
2.3 Installing Tera1 Firmware Release 3.4.1 or Later	11
2.3.1 Checking the Firmware Version	11
Example: Finding the Firmware Release	12
2.3.2 Updating the Firmware	12
Example	12
2.4 Installing PCoIP Host Driver Software Release v3.3.20 for Windows	13
2.5 Ensuring your Operating System Complies with VMware View	13
3 Host PC Configuration	14
3.1 Installing the VMware View Agent on a Host PC	14
4 Configuring a Physical PC in View	16
5 Installing the PCoIP Host Driver Software	17
5.1 Installing the PCoIP Host Driver Software on a Host PC	17
6 Configuring the PCoIP Zero Client	18
7 Connecting a PCoIP Zero Client to View	20
7.1 Testing the PCoIP Connection	20
8 Deployment Considerations	21
8.1 Bandwidth Matrix for Various Setups of Zero Clients, Soft Clients, and Hosts	21
9 Known Issues, Troubleshooting, and FAQ	22
Troubleshooting	22
9.2 Frequently Asked Questions	22
How can I verify the PCoIP host driver software is installed and running properly?	22
Can I connect a supported VMware software client to a workstation?	22

Match case Limit results 1 per page

Using PCoIP Host Cards with VMware View

TER0911004 Issue 2

Click

Apply

The VMware View logo should appear on the OSD

Connect

screen of the zero client.