Husqvarna RZ54i Owners Manual - Page 27

Before Starting, Maintenance Schedule

Get Husqvarna RZ54i PDF manuals and user guides View all Husqvarna RZ54i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

OPERATION Before Starting 1. Read the sections on Safety and Controls before starting the machine. 2. Perform the daily maintenance before starting (see Maintenance Schedule in the Maintenance section). 3. Check that there is sufficient fuel in the fuel tank. 4. Adjust the seat to the desired position. Lengthways adjustment 5. Set the deck cutting height by inserting the lift pin into the desired cut height. The following conditions must be fulfilled before the engine can be started: • The blade switch must be pressed downward into the disengaged position. • The park brake must be up into the activated position. • Both steering controls must be in the locked (outer) neutral position. Secure selected cutting height 8058-252 8058-255 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
27
OPERATION
Before Starting
1.
Read the sections on
Safety
and
Controls
before
starting the machine.
2.
Perform the daily maintenance before starting
(see
Maintenance Schedule
in the
Maintenance
section).
3.
Check that there is sufficient fuel in the fuel tank.
4.
Adjust the seat to the desired position.
8058-255
Secure selected cutting height
5.
Set the deck cutting height by inserting the lift pin
into the desired cut height.
8058-252
Lengthways adjustment
The following conditions must be fulfilled before the
engine can be started:
•
The blade switch must be pressed downward into
the disengaged position.
•
The park brake must be up into the activated
position.
•
Both steering controls must be in the locked
(outer) neutral position.