Husqvarna RZ54i Owners Manual - Page 33

Stopping the Engine, Unexpected Engine Stop

Page 33 highlights

OPERATION Stopping the Engine 1. Move the throttle to the mid throttle position. 2. Move the steering controls outward. 3. Disengage the mower deck by pressing the blade switch down. 8058-249 Disengage the mower deck and move throttle to minimum 4. When the machine is standing still, activate the park brake by pushing the lever release button and pulling the lever upward. If the engine has been worked hard, allow it to idle at least 60 seconds to attain a normal operating temperature before stopping. To prevent fouling the spark plugs, avoid idling the engine for longer periods. Raise the mower deck 5. Press and release the S/S button to stop the engine. The ignition system will return to the a ready-to-start mode with a blinking green light. The electrical system will automatically shut down thirty seconds after the operator leaves the seat. It can be deactivated immediately by pressing and holding button 1 and button 3 simultaneously for two seconds. Unexpected Engine Stoppage If the engine stops unexpectedly and all of the SmartSwitch indicator lights flash simultaneously, it is an indication of a nonsafety related shutdown (example, running out of gas). The system will reset after a few moments and return to a prestart status. The reason for the shutdown must be identified and corrected prior to attempting a restart (example, refuel the unit). Press the S/S button to stop the engine 8058-019 8058-278 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

33
OPERATION
Stopping the Engine
1.
Move the throttle to the mid throttle position.
2.
Move the steering controls outward.
3.
Disengage the mower deck by pressing the blade
switch down.
8058-249
Disengage the mower deck and move throttle to minimum
4.
When the machine is standing still, activate the
park brake by pushing the lever release button
and pulling the lever upward.
If the engine has been worked hard, allow it to idle
at least 60 seconds to attain a normal operating
temperature before stopping. To prevent fouling
the spark plugs, avoid idling the engine for longer
periods.
8058-019
Raise the mower deck
5.
Press and release the S/S button to stop the
engine. The ignition system will return to the a
ready-to-start mode with a blinking green light.
The electrical system will automatically shut
down thirty seconds after the operator leaves
the seat. It can be deactivated immediately by
pressing and holding button 1 and button 3
simultaneously for two seconds.
8058-278
Press the S/S button to stop the engine
Unexpected Engine Stoppage
If the engine stops unexpectedly and all of the
SmartSwitch indicator lights flash simultaneously,
it is an indication of a nonsafety related shutdown
(example, running out of gas). The system will reset
after a few moments and return to a prestart status.
The reason for the shutdown must be identified and
corrected prior to attempting a restart (example, refuel
the unit).