Husqvarna RZ54i Owners Manual - Page 44
Cutting Blades, Blade replacement, with gloves and/or wrap blades with
View all Husqvarna RZ54i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
MAINTENANCE Cutting Blades To attain the best mowing effect, it is important that blades are well sharpened and not damaged. Replace blades that have been bent or cracked when hitting obstacles. Let the service workshop should decide whether the blade can be repaired/ground or must be replaced. Balance the blades after sharpening. Check the blade mounts. WARNING! Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling. The sharpening of blades should be carried out by an authorized service workshop. Check the blades Blade replacement 1. Remove blade bolt by turning counterclockwise. 2. Install new or resharpened blade with stamped GRASS SIDE facing towards ground/grass (down) or THIS SIDE UP facing deck and spindle housing. 1 3. Seat the blade opening firmly onto the spindle housing. 4. Tighten blade bolt securely. 5. Torque blade bolt to 45-55 ft/lbs (60-75 Nm). 2 IMPORTANT INFORMATION Special blade bolt is heat treated. Replace with a Husqvarna bolt if required. Do not use lower grade hardware than specified. 1. Blade 2. Blade bolt (special) 3. Spindle housing Blade attachment 8058-166 3 8058-129 44