Husqvarna T540 XP II Owner Manual - Page 21
Fueling
View all Husqvarna T540 XP II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Fueling FUEL HANDLING • Loosen the cap by turning it counterclockwise. WARNING! Taking the following ! precautions, will lessen the risk of fire: Always stop the engine and let it cool for a few minutes before refueling. Do not smoke and do not place any hot objects in the vicinity of fuel. When refuelling, open the fuel cap slowly so that any excess pressure is released gently. Tighten the fuel cap carefully after refueling. Always move the machine away from the refueling area and source before starting. Clean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter must be replaced at least once a year. Contamination in the tanks causes malfunction. Make sure the fuel is well mixed by shaking the container before refuelling. The capacities of the chain oil tank and fuel tank are carefully matched. You should therefore always fill the chain oil tank and fuel tank at the same time. • Remove the cap. Replacing fuel cap and chain oil cap • Insert the cap with the flip lever in an upright position. • Tighten the cap securely by turning it clockwise. WARNING! Fuel and fuel vapor are highly ! flammable. Take care when handling fuel and chain oil. Be aware of the risks of fire, explosion and those associated with inhalation. Removing fuel cap and chain oil cap • Press down on the textured area of the flip lever and lift to an upright position. • Fold the flip lever down. IMPORTANT! Always replace a damaged cap. English - 21