Husqvarna T540 XP II Owner Manual - Page 24
Stopping
View all Husqvarna T540 XP II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
STARTING AND STOPPING firmly and rapidly until the engine starts. Never wrap the starter cord around your hand not drop start. This method is very dangerous because you may lose control of the saw. CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine. As the chain brake is still activated the engine must return to idling speed as soon as possible by disengaging the throttle latch in order to avoid unnecessery wear on the clutch assembly. • Never start the machine indoors. Exhaust fumes can be dangerous if inhaled. • Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment. Note! Reset the chain brake by pulling the front hand guard back (marked "PULL BACK TO RESET") towards the front handle. The chainsaw is now ready for use. • Always hold the saw with both hands. The right hand should be on the top handle, and the left hand on the front handle. All people, whether right or left handed, should use this grip. Use a firm grip with thumbs and fingers encircling the chainsaw handles. • Never start a chainsaw unless the bar, chain and all covers are fitted correctly. See instructions under the heading Assembly. Without a bar and chain attached to the chainsaw the clutch can come loose and cause serious injury. Stopping The engine is stopped by pushing the stop switch to the stop position. • The chain brake should be activated when starting. Se instructions under the heading Start and stop. Do 24 - English