Husqvarna T540 XP II Owner Manual - Page 44
Technical Data
View all Husqvarna T540 XP II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
TECHNICAL DATA Technical data Engine Cylinder displacement, cu.in/cm3 Cylinder bore, inch/mm Stroke, inch/mm Idle speed, rpm Power, kW/hp @ rpm Emissions Durability Period according to California Air Resources Board, h. Ignition system Spark plug Electrode gap, inch/mm Fuel and lubrication system Fuel tank capacity, US pint/litre Oil pump capacity at 9,000 rpm, ml/min Oil tank capacity, US pint/litre Type of oil pump Weight Chainsaw without bar, chain and with empty tanks, lb/kg Chain/bar Standard bar length, inch/cm Pitch, inch/mm Thickness of drive links, inch/mm Drive sprocket type/teeth Chain speed at 133% of maximum engine power speed, ft/s / m/s. T540 XP II 2.3/37,7 1.57/40 1.18/30 3000 1,8/2,5 @ 10 200 125 NGK CMR6H 0.02/0,5 0.72/0,34 5-12,5 0.42/0,20 Adjustable 8,6/3,9 16"/41 3/8" /9,52 0.050/1,3 Spur/6 84.6 / 25,8 NOTE! This spark ignition system complies with the Canadian ICES-002 standard. Recommended cutting equipment for USA Following is a list of recommended cutting equipment for Husqvarna chainsaw model T540 XP II. This chainsaw model equipped with either of the listed bar and saw chain combination(s), fulfills the requirements according to ANSI B175.12012 (Gasoline Powered Chain Saws - Safety Requirements). The following list is the chainsaw manufacturers recommendations. There may be other combinations available, which will also achieve kickback reduction. Chainsaw model Husqvarna T540 XP II met the kickback performance requirements of ANSI B175.1-2012 when tested with the combinations of bars and saw chains listed below. The saw chain Husqvarna H37 is also classified as a low kickback saw chain since it met the requirements for low kickback saw chain outlined in ANSI B175.1-2012. We recommend to use only the listed combinations of bars and chains for chainsaw model Husqvarna T540 XP II. Other chainsaw models may not meet the kickback requirements when equipped with the listed guide bar and saw chain combinations. Recommended cutting equipment for Canada Following is a list of recommended cutting equipment for the Husqvarna chainsaw model T540 XP II. The listed combination(s) of powerhead, guide bar and saw chain meet all requirements outlined in Canadian Standards Assosiation Z62.1-15 (Chain Saws) and Z62.3-11 (R2016) (Chain Saw Kickback). Furthermore the saw chain Husqvarna H37 is evaluated and listed as a Type C Low Kickback Saw Chain according to the provisions in Z62.3-11 (R2016). 44 - English