IBM 2367 Hardware Maintenance Manual - Page 104
PC Card slot assembly, Make sure that the connector of the PC
View all IBM 2367 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Removing and replacing a FRU 1150 PC Card slot assembly For access, remove these FRUs, in order: v "1010 Battery pack" on page 61 v "1020 Ultrabay Plus device" on page 62 v "1030 Hard-disk drive" on page 63 v "1050 Backup battery" on page 67 v "1060 DIMM" on page 69 v "1090 Keyboard" on page 77 v "1120 Keyboard bezel" on page 87 1 1 2 Step 1 Screw (quantity) M2 × 16 mm, nylon-coated (4) Torque 0.245 Nm (2.5 kgfcm) When installing: Make sure that the connector of the PC card slot is firmly attached, and then secure the screws. 100 ThinkPad T30 (MT 2366, 2367)
1150 PC Card slot assembly
For access, remove these FRUs, in order:
v
“1010 Battery pack” on page 61
v
“1020 Ultrabay Plus device” on page 62
v
“1030 Hard-disk drive” on page 63
v
“1050 Backup battery” on page 67
v
“1060 DIMM” on page 69
v
“1090 Keyboard” on page 77
v
“1120 Keyboard bezel” on page 87
2
1
1
Step
Screw (quantity)
Torque
±1²
M2 × 16 mm, nylon-coated (4)
0.245 Nm
(2.5 kgfcm)
When installing:
Make sure that the connector of the PC
card slot is firmly attached, and then
secure the screws.
Removing and replacing a FRU
100
ThinkPad T30 (MT 2366, 2367)