IBM 2367 Hardware Maintenance Manual - Page 33
Passwords, Power-on password:, Hard-disk password:
View all IBM 2367 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Related service information Product Recovery program ... Reinstall the Product Recovery program? (Y/N) [ ]". v To install the service partition, go to step 4. v To preload the hard-disk drive without installing the service partition, press N key. 8. If you get a message asking which operating system to install, select the proper operating system and press Enter. 9. A message is displayed: "Full Recovery:". Press Enter to select. 10. On each of the next three windows, press the Y key. 11. Follow the prompts to complete the recovery. Passwords As many as three passwords may be needed for any ThinkPad computer: the power-on password (POP), the hard-disk password (HDP), and the supervisor password (SVP). If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on. The computer does not start until the password is entered. Exception: If only an SVP is installed, the password prompt does not appear when the operating system is booted. Power-on password: A power-on password (POP) protects the system from being powered on by an unauthorized person. The password must be entered before an operating system can be booted. Hard-disk password: There are two hard-disk passwords (HDPs): v User HDP-for the user v Master HDP-for the system administrator, who can use it to get access to the hard disk even if the user has changed the user HDP Note: There are two modes for the HDP: User only and Master + User. The Master + User mode requires two HDPs; the system administrator enters both in the same operation. The system administrator then provides the user HDP to the system user. General descriptions 29