IBM 2367 Hardware Maintenance Manual - Page 121

LCD panel and LCD cable assembly, the same vendor, and having the same resolution

Page 121 highlights

Removing and replacing a FRU 2030 LCD panel and LCD cable assembly For access, remove these FRUs, in order: v "1010 Battery pack" on page 61 v "1020 Ultrabay Plus device" on page 62 v "1050 Backup battery" on page 67 v "1070 Mini PCI adapter" on page 71 v "1080 Communication daughter card (CDC)" on page 74 v "1030 Hard-disk drive" on page 63 v "1090 Keyboard" on page 77 v "1120 Keyboard bezel" on page 87 v "1130 Hinge cover" on page 92 v "1140 LCD assembly" on page 94 v "2010 LCD front bezel" on page 114 v "2020 Inverter card" on page 115 Important LCD panel FRUs for the ThinkPad T30 series are supplied by different vendors and differ in resolution and base brightness. When you order and replace the LCD panel FRU, note the following: v The LCD panel FRU must be used with the inverter card corresponding to the base brightness. v Replace the new LCD panel FRU with one from the same vendor, and having the same resolution and base brightness as the defective LCD panel. v If no LCD panel FRU with the same base brightness as the defective LCD panel is available, use an "LCD panel and inverter kit" from the same vendor, with the same resolution. v For more details about the FRU numbers or the combination of the LCD panel FRU and the inverter card FRU, see "LCD FRUs" on page 149. ThinkPad T30 117

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168

2030 LCD panel and LCD cable
assembly
For access, remove these FRUs, in order:
v
“1010 Battery pack” on page 61
v
“1020 Ultrabay Plus device” on page 62
v
“1050 Backup battery” on page 67
v
“1070 Mini PCI adapter” on page 71
v
“1080 Communication daughter card (CDC)” on page 74
v
“1030 Hard-disk drive” on page 63
v
“1090 Keyboard” on page 77
v
“1120 Keyboard bezel” on page 87
v
“1130 Hinge cover” on page 92
v
“1140 LCD assembly” on page 94
v
“2010 LCD front bezel” on page 114
v
“2020 Inverter card” on page 115
Important
LCD panel FRUs for the ThinkPad T30 series are
supplied by different vendors and differ in resolution
and base brightness. When you order and replace
the LCD panel FRU, note the following:
v
The LCD panel FRU must be used with the
inverter card corresponding to the base
brightness.
v
Replace the new LCD panel FRU with one from
the same vendor, and having the same resolution
and base brightness as the defective LCD panel.
v
If no LCD panel FRU with the same base
brightness as the defective LCD panel is
available, use an “LCD panel and inverter kit”
from the same vendor, with the same resolution.
v
For more details about the FRU numbers or the
combination of the LCD panel FRU and the
inverter card FRU, see “LCD FRUs” on page 149.
Removing and replacing a FRU
ThinkPad T30
117