IBM 2367 Hardware Maintenance Manual - Page 117
Lift the front side of the I/O card slightly, connector and the cable holder firmly
View all IBM 2367 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Removing and replacing a FRU Lift the front side of the I/O card slightly 7 to release the guide hole a of the card , and then remove the card in the direction of the arrow 8 . 7 a 8 Cable routing: When installing the I/O card, make sure that you have attached the cable connector and the cable holder firmly as shown in the figure. Otherwise you will not be able to install the system board properly. ThinkPad T30 113
Lift the front side of the I/O card slightly
±7²
to release the
guide hole
±a²
of the card , and then remove the card in
the direction of the arrow
±8²
.
7
8
a
Cable routing:
When installing the I/O card, make sure
that you have attached the cable
connector and the cable holder firmly as
shown in the figure. Otherwise you will not
be able to install the system board
properly.
Removing and replacing a FRU
ThinkPad T30
113