IBM 2681 Hardware Maintenance Manual - Page 59
Default
UPC - 087944884422
View all IBM 2681 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Symptom-to-FRU index Symptom or error 0250 System battery error-System battery is dead. 0251 System CMOS checksum bad-Default configuration used. 0252 Password checksum bad-The password is cleared. 0260 System timer error 0270 Real time clock error 0271 Date and time error-Neither the date nor the time is set in the computer. 0280 Previous boot incomplete-Default configuration used. 02B2 Incorrect drive A type 02F4 EISA CMOS not writable 02F5 DMA test failed 02F6 Software NMI failed 02F7 Fail-safe timer NMI failed 1801 Attached docking station is not supported 1802 Unauthorized network card is plugged in-Power off and remove the miniPCI network card. FRU or action, in sequence Replace the backup battery and run IBM BIOS Setup Utility to reset the time and date. Replace the backup battery and run IBM BIOS Setup Utility to reset the time and date. Reset the password by running IBM BIOS Setup Utility. 1. Replace the backup battery and run IBM BIOS Setup Utility to reset the time and date. 2. System board. 1. Replace the backup battery and run IBM BIOS Setup Utility to reset the time and date. 2. System board. Run IBM BIOS Setup Utility to reset the time and date. 1. Load "Setup Default" in IBM BIOS Setup Utility. 2. DIMM. 3. System board. 1. Diskette drive. 2. External FDD cable. 3. I/O card. 1. Load Setup Defaults in IBM BIOS Setup Utility. 2. Replace the backup battery. 3. System board. 1. DIMM. 2. System board. 1. DIMM. 2. System board. 1. DIMM. 2. System board. Shut down the computer and remove it from the docking station. 1. Remove Mini PCI network card. 2. System board. ThinkPad R40 55