IBM 3580-L11 Setup Guide - Page 21
Installing the 3580 Tape Drive, Step 1. Unpacking the Tape Drive
View all IBM 3580-L11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 2. Installing the 3580 Tape Drive To install the 3580 Tape Drive, complete the following steps. DANGER An electrical outlet that is not correctly wired could place hazardous voltage on metal parts of the system or the products that attach to the system. It is the customer's responsibility to ensure that the outlet is correctly wired and grounded to prevent an electrical shock. (RSFTD201) Step 1. Unpacking the Tape Drive __ 1. Unpack the 3580 Tape Drive. __ 2. Inspect the 3580 Tape Drive for shipping damage. If there is damage, do not install the tape drive. Report the damage immediately by contacting your place of purchase. Step 2. Using the Inventory Checklist Ensure that you have received the following items: __ 1. Power cord (for the appropriate cord for your country, see "Appendix F. Power Cords" on page 73) __ 2. IBM LTO Ultrium Data Cartridge __ 3. IBM LTO Ultrium Cleaning Cartridge __ 4. Single-connector SCSI wrap tool __ 5. Device driver kit that includes: v CD that contains the device driver, the IBM Ultrium Device Drivers Installation and User's Guide, and the IBM Ultrium Device Drivers Programming Reference v Published copy of the IBM Ultrium Device Drivers Installation and User's Guide __ 6. A host-to-device SCSI bus (signal) cable and a terminator __ 7. The IBM 3580 Ultrium Tape Drive Quick Reference __ 8. The IBM 3580 Ultrium Tape Drive Setup, Operator, and Service Guide (this guide) __ 9. The Translated Safety Notices for External Devices manual © Copyright IBM Corp. 2000 5