IBM 3580-L11 Setup Guide - Page 32
Unload Button, If you press the Unload button during operation, the 3580 Tape Drive ends
View all IBM 3580-L11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Unload Button The unload push button ( 1 in Figure 5 on page 15) enables you to perform several functions. Table 2 lists the functions and explains how to initiate them. Note: If you press the Unload button during operation, the 3580 Tape Drive ends the command that is being processed, and unloads and ejects the tape cartridge. Table 2. Functions That the Unload Button Performs Function How to Initiate the Function Rewind the tape into a cartridge and eject the cartridge from the tape drive Press the unload button once. Note: During a rewind and eject operation, the 3580 Tape Drive will not accept SCSI commands from the host. Place the tape drive in maintenance mode Ensure that the tape drive is unloaded. Then, within two seconds push the unload button 3 times. The drive is in maintenance mode when the status light becomes solid amber and 0 appears in the single-character display. Note: While in maintenance mode, the 3580 Tape Drive will not accept SCSI commands from the host. Scroll through the maintenance functions Exit maintenance mode While in maintenance mode, push the unload button once per second to increment the characters on the single-character display by one. When you reach the character of the diagnostic or maintenance function that you want (see Table 7 on page 41), press and hold the unload button for 3 seconds. Press the unload button once per second until 0 displays. Then press and hold the unload button for 3 seconds. The drive has exited maintenance mode when the status light becomes solid green and the single-character display becomes blank. 16 IBM 3580 Tape Drive Setup, Operator, and Service Guide