IBM 84802AX Installation Guide - Page 19

Complete steps

Page 19 highlights

4. Align the post in the center of the foot with the hole on the bottom of the server and place the foot between the guides as indicated. The following illustration shows the rear feet on the bottom rear of the server. Guides Feet (locked position) Guides 5. Rotate the foot outward until the foot locks into place. 6. Complete steps through for each foot. Attention: When you need to access the inside of the server to install options, you might find it easier to lay the server on its side. If you do so, make sure the feet are in the horizontal position (see the previous steps). Otherwise, the feet might break off from the server because of the weight of the server. Chapter 2. Installing options 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78

Chapter 2.
Installing options
7
4.
Align the post in the center of the foot with the hole on the bottom of the server
and place the foot between the guides as indicated.
The following illustration shows the rear feet on the bottom rear of the server.
5.
Rotate the foot outward until the foot locks into place.
6.
Complete steps
through
for each foot.
Attention:
When you need to access the inside of the server to install options,
you might find it easier to lay the server on its side. If you do so, make sure the
feet are in the horizontal position (see the previous steps). Otherwise, the feet
might break off from the server because of the weight of the server.
Feet (locked position)
Guides
Guides