IBM 84903bu User Guide - Page 42
Installing, drive
UPC - 000435882073
View all IBM 84903bu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Installing a drive Depending on the server model, one or more of the following drives might be installed in the server: v Diskette drive (optional) v Hard disk drive v CD-ROM, CD-RW, or DVD/CD-RW combo drive Some hot-swap Serial Attached SCSI (SAS) models might come with an integrated drive electronics (IDE) CD-ROM drive in bay 1 and four hot-swap hard disk drive bays. Some simple-swap Serial Advanced Technology Attachment (SATA) models might come with an IDE CD-ROM drive in bay 1 and a simple-swap SATA hard disk drive in bay 4. Some non-hot-swap SATA models might come with an IDE CD-ROM drive in bay 1 and a non-hot-swap SATA hard disk drive in bay 4. Some hot-swap SATA models might come with an IDE CD-ROM drive in bay 1 and a hot-swap SATA hard disk drive in bay 4. The following illustration shows the drive bays. Bay 1 Bay 2 Bay 3 Bay 4 Bay 5 Bay 6 Bay 7 The following notes describe the types of drives that the server supports and other information that you must consider when installing a drive: v Make sure that you have all the cables and other equipment specified in the documentation that comes with the drive. v Check the instructions that come with the drive to see whether you have to set any switches or jumpers on the drive. If you are installing a SAS device, be sure to set the SAS ID for that device. 28 xSeries 206m Types 8485 and 8490: User's Guide