IBM 84903bu User Guide - Page 68
Passwords
UPC - 000435882073
View all IBM 84903bu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Passwords Supervisor Adapter is installed, the full text of the error messages is displayed; otherwise, the log contains only numeric error codes. Run the diagnostic program to get more information about error codes that occur. For instructions, see the diagnostic information in the Problem Determination and Service Guide on the IBM xSeries Documentation CD. Select Clear error logs to clear the mini-BMC system-event log. Important: If the system-error LED on the front of the server is lit but there are no other error indications, clear the mini-BMC system-event log. This log does not clear itself, and if it begins to fill up, the system-error LED will be lit. Also, after you complete a repair or correct an error, clear the mini-BMC system-event log to turn off the system-error LED on the front of the server. v Error Log Select this choice to view or clear error logs. - POST Error Log Select this choice to view the three most recent error codes and messages that the system generated during POST. Select Clear error logs to clear the POST error log. - System Event/Error Log Select this choice to view the three most recent error codes and messages that the system generated during POST and all system status messages from the service processor. Select Clear error logs to clear the system event/error log. Important: If the system-error LED on the front of the server is lit but there are no other error indications, clear the system event/error log. This log does not clear itself, and if it begins to fill up, the system-error LED will be lit. Also, after you complete a repair or correct an error, clear the system event/error log to turn off the system-error LED on the front of the server. v Save Settings Select this choice to save the changes that you have made in the settings. v Restore Settings Select this choice to cancel the changes that you have made in the settings and restore the previous settings. v Load Default Settings Select this choice to cancel the changes that you have made in the settings and restore the factory settings. v Exit Setup Select this choice to exit from the Configuration/Setup Utility program. If you have not saved the changes that you have made in the settings, you are asked whether you want to save the changes or exit without saving them. From the System Security choice, you can set, change, and delete a power-on password and an administrator password. The System Security choice is on the full Configuration/Setup menu only. If you set only a power-on password, you must type the power-on password to complete the system startup and to have access to the full Configuration/Setup Utility menu. 54 xSeries 206m Types 8485 and 8490: User's Guide