IBM 8687 Installation Guide - Page 85

Remote Expansion Enclosure, This could damage the SCSI cable. See tip H176217

Page 85 highlights

PCI-X slot 4 PCI-X slot 3 (100 MHz) (100 MHz) PCI-X slot 5 (133 MHz) Back of server PCI-X slot 2 (66 MHz) PCI-X slot 6 (133 MHz) PCI-X slot 1 (66 MHz) Bus: D C B A Figure 3-3 PCI-X slots in the x440 Other configuration information: The x440 server supports connection to the RXE-100. Refer to 3.2.3, "Remote Expansion Enclosure" on page 78 for more information. Video adapters are not supported. The PCI slots supports 3.3 V adapters only. Important: 5 V adapters are not supported. The ServeRAID 4H adapter is not supported for internal drives because the adapter is too high to fit in the 4U server when a cable is attached to its internal connector. Do not install a ServeRAID card in slot 1. This is because there is little space between the top of the adapter and the cover when the covers are closed. This could damage the SCSI cable. See tip H176217 at http://www.pc.ibm.com/qtechinfo/MIGR-43804.html for details. The x440 comes with an additional pre-installed cable to enable the ServeRAID adapter to connect to the internal drives. Chapter 3. Planning 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202

Chapter 3. Planning
71
Figure 3-3
PCI-X slots in the x440
Other configuration information:
±
The x440 server supports connection to the RXE-100.
Refer to 3.2.3,
Remote Expansion Enclosure
on page 78 for more
information.
±
Video adapters are not supported.
±
The PCI slots supports 3.3 V adapters only.
±
The ServeRAID 4H adapter is not supported for internal drives because the
adapter is too high to fit in the 4U server when a cable is attached to its
internal connector.
±
Do not install a ServeRAID card in slot 1. This is because there is little space
between the top of the adapter and the cover when the covers are closed.
This could damage the SCSI cable. See tip H176217 at
for details.
±
The x440 comes with an additional pre-installed cable to enable the
ServeRAID adapter to connect to the internal drives.
Important:
5 V adapters are not supported.
PCI-X slot 1
(66
)
MHz
PCI-X slot 2
(66
)
MHz
PCI-X slot 3
(100
)
MHz
PCI-X slot 4
(100
)
MHz
PCI-X slot 5
(133
)
MHz
Back of server
Bus: D
B
A
C
PCI-X slot 6
(133 MHz)