Icom IC-7300 Instruction Manual basic - Page 22
Setting the frequency
View all Icom IC-7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
3 BASIC OPERATION Setting the frequency DDUsing the Main Dial 1. Select the desired operating band. (Example: 21 MHz) DDChanging the Tuning Step When the Tuning Step function is ON, you can change the tuning steps for each operating mode. 1. Select the desired operating mode. (p. 3-2) (Example: USB) 2. Touch the kHz digit for 1 second. ••The TS (SSB) screen is displayed. BAND STACKING REGISTER screen 2. Rotate MAIN DIAL . 3. Touch the desired tuning step. (Example: 0.1 k) ••The tuning step is set and returns to the previous screen. The Tuning Step function is ON. LIf you cannot change the frequency, make sure the Dial Lock function is turned OFF. (p. 3-9) L is displayed when you set an amateur radio frequency, and is displayed when you set a frequency outside the Ham band, or outside your set Band Edges. DDAbout the Tuning Step function You can set the MAIN DIAL 's tuning step for each operating mode. The following steps are set as default. ••SSB/CW/RTTY (TS OFF): 10 Hz ••AM (TS ON): 1 kHz ••FM (TS ON): 10 kHz Touch the kHz digits to turn the Tuning Step function ON or OFF. L The Tuning Step function's icon "▼" is displayed above the 1 kHz digit. TS (SSB) screen DDAbout the 1 Hz step Fine Tuning function You can use the minimum tuning step of 1 Hz for fine tuning in the SSB, CW and RTTY modes. Touch the Hz digits for 1 second to turn the Fine Tuning function ON or OFF. ••The 1 Hz digit is displayed. 1Hz digit The Tuning Step function is ON. LWhen using the [UP]/[DN] keys on the microphone, the frequency changes in 50 Hz steps with the Fine Tuning function ON or OFF. 3-3