Icom IC-7300 Instruction Manual basic - Page 44
Electronic Keyer function
View all Icom IC-7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
4 RECEIVING AND TRANSMITTING Operating CW (Continued) DDElectronic Keyer function You can set the Memory Keyer function settings, paddle polarity settings, and so on of the Electronic Keyer. 1. Open the KEYER screen in the CW mode. MENU » KEYER LYou can select [KEYER] on the MENU screen only in the CW mode. 2. Touch [EDIT/SET]. ••Opens the EDIT/SET screen. EDIT Keyer memory edit menu You can edit the Keyer memories. KEYER screen 3. Select the desired item to set. EDIT/SET screen EXIT Contest number menu You can set the number style, count up trigger, and present number. 001 SET Rotate Push CW-KEY SET Key set menu You can set the memory keyer repeat time, dot/dash ratio, paddle polarity, key type, and so on. 4. To close the KEYER screen, push EXIT several times. DDMonitoring the CW side tone When the transceiver is in standby and the Break-In function is OFF, you can listen to the CW side tone without actually transmitting. LLInformatio ••This enables you to match your transmit frequency exactly to another station's by matching the audio tone. ••You can also use the CW side tone (make sure the Break-in function is OFF (p. 4-12)) to practice CW sending. ••You can adjust the CW side tone level in "Side Tone Level." MENU » KEYER > EDIT/SET > CW-KEY SET > Side Tone Level 4-14