Icom IC-7300 Instruction Manual basic - Page 23
About the 1/4 Tuning function, Directly entering a frequency, About the Auto Tuning Step function
View all Icom IC-7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3 BASIC OPERATION Setting the frequency (Continued) DDAbout the 1/4 Tuning function Mode: SSB-D/CW/RTTY With the Tuning Function OFF, turn ON the 1⁄4 Tuning function to reduce the tuning speed to 1⁄4 of the normal speed, for finer tuning. 1. Push FUNCTION . ••Opens the FUNCTION screen. 2. Touch [1/4]. FUNCTION screen 3. Push EXIT . 1/4 Tuning function DDAbout the Auto Tuning Step function The tuning step automatically changes, depending on the rotating speed of MAIN DIAL . LYou can change the Auto Tuning Step function settings in the following menu. (p. 8-4) MENU » SET > Function > MAIN DIAL Auto TS DDDirectly entering a frequency You can set the frequency without rotating MAIN DIAL 1 by directly entering on the keypad. 2 Entering the operating frequency 1. Touch the MHz digits. 3 (Example: 14) 4 5 6 ••Opens the BAND STACKING REGISTER screen. 2. Touch [F-INP]. 7 8 9 10 BAND STACKING REGISTER screen ••Opens the F-INP screen. 3. Start entry with the MHz digits. LTo clear the entry, touch [CE]. LTo clear the entry and return to the previous screen, push EXIT . 11 12 13 14 15 16 17 F-INP screen (Example:14.025) 18 4. Touch [ENT] to set the entered frequency. ••Closes the F-INP screen. LIf you touch [ENT] when the digits under 100 kHz are not entered, "0" will be automatically entered into the digits that are blank. Entry examples ••14.025 MHz: [1], [4 0], [2], [5], [ENT] ••18.0725 MHz: [1], [8 0], [7], [2], [5], [ENT] ••730 kHz: [0 7], [3], [ENT] ••5.100 MHz: [5 1], [ENT] ••7.000 MHz: [7], [ENT] ••Changing from 21.280 MHz to 21.245 MHz: 2], [4], [5], [ENT] 19 20 21 3-4