Icom IC-7300 Instruction Manual basic - Page 49
Center mode, Fixed mode, Marker
View all Icom IC-7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5 SCOPE OPERATION Spectrum scope screen (Continue) DDCenter mode Displays signals around the operating frequency within the selected span. The operating frequency is always displayed in the center of the screen. 1. Open the SPECTRUM SCOPE screen. MENU » SCOPE DDFixed mode Displays signals within a specified frequency range. 1 The selected frequency band activity can easily be observed this mode. 2 Three Fixed Edge bands can be set for each amateur frequency band covered by the transceiver in the SCOPE SET screen. 3 1. Open the SPECTRUM SCOPE screen. 4 MENU » SCOPE 5 6 7 Center mode screen 2. Touch [CENT/FIX]. ••" CENTER " is displayed when the Center mode is selected. LTouch [CENT/FIX] to toggle between the Center and Fixed modes. 3. Touch [SPAN] several times to select the scope span. ••Selectable span: ±2.5, 5.0, 10, 25, 50, 100, 250 and 500 kHz LTouch [SPAN] for 1 second to select the ±2.5 kHz span. 4. To exit the SPECTRUM SCOPE screen, push EXIT . DDMarker The Marker displays the operating frequency in the SPECTRUM SCOPE screen. • Marker types : RX marker displays the receive frequency. : TX marker displays the transmit frequency. Touch [MARKER] to select the marker. ••When the Center mode is selected: TX, Marker OFF ••When the Fixed mode is selected: RX/TX, RX L When the Maker is displayed and the frequency is out of range, "" is displayed in the upper side corners of the SPECTRUM SCOPE screen. : The frequency is outside the higher edge. 8 9 Fixed mode screen 2. Touch [CENT/FIX]. ••" FIX " is displayed when the Fixed mode is selected. LTouch [CENT/FIX] to toggle between the Center and Fixed modes. 3. Touch [EDGE] several times to select the Edge frequency. L When the operating frequency moves outside the upper or lower Edge frequency, "" is dispalyed in the upper side corners of the SPECTRUM SCOPE screen. : The frequency is outside the higher edge. W hen the frequency goes further away, "Scope Out of Range" is displayed. 4. To exit the SPECTRUM SCOPE screen, push EXIT . 10 11 12 13 14 15 16 17 18 • About RX Marker 19 In the Fixed mode, the RX Marker displays the operating frequency within a specified frequency range. So, the transceiver always displays the RX 20 marker in the scope screen. In the Center mode, the operating frequency stays on 21 the Center of the screen. Thus, the transceiver does not display the RX Marker. LWhen the Hold function is ON, the RX Marker is displayed to display the operating frequency's position. Marker icon Marker RX Marker ON (Fixed mode) 5-2