Icom IC-7300 Instruction Manual basic - Page 50

Audio scope screen

Page 50 highlights

5 SCOPE OPERATION Spectrum scope screen (Continue) DDTouch screen operation When you touch the FFT scope zone or the waterfall zone in the SPECTRUM SCOPE screen, the area will be zoomed in. Then you touch the signal in the zoomed area, you can directly tune your frequency to the signal in the SPECTRUM SCOPE screen. LHolding down XFC changes the transmit frequency. 1. Open the SPECTRUM SCOPE screen. MENU » SCOPE 2. Touch the Scope screen. ••The area around the touched point is zoomed in. LTouch only the FFT scope zone or Waterfall zone. Audio scope screen This audio scope enables you to display the received signal's frequency component on the FFT scope, and its waveform components on the Oscilloscope. The FFT scope also has an waterfall. 1. Open the AUDIO SCOPE screen. MENU » AUDIO 3. Touch the signal in the zoomed area. LLInformatio ••In the Center mode, the operating frequency changes to the touched point, and the point moves to the screen center. ••In the Fixed mode, the operating frequency and marker change to the touched point. ••Touch out of the zoomed area to close the zoomed window. DDMini scope screen The Mini scope screen can be simultaneously displayed with another function displays, such as the RTTY DECODE screen and the AUDIO SCOPE screen. Push M.SCOPE to turn the Mini scope screen ON or OFF. LHold down M.SCOPE for 1 second to display the SPECTRUM SCOPE screen. AUDIO SCOPE screen Key ATT HOLD LEVEL TIME EXPD/ SET Action Touch Selects the attenuator for the FFT scope. • 0 (OFF), 10, 20, or 30 dB Touch for 1 second Turns OFF the attenuator. (0 dB) Sets the Hold function to ON or OFF. • " HOLD " is displayed and freezes the current audio spectrum. Selects the Oscilloscope level. • 0, -10, -20, or -30 dB Selects the Oscilloscope sweep time. • 1, 3, 10, 30, 100, or 300 ms/Div Touch Selects the Expanded or Normal screen. Touch for Enters the AUDIO SCOPE SET 1 second screen. 2. To exit the AUDIO SCOPE screen, push EXIT . • AUDIO SCOPE screen Waterfall zone FFT Scope zone Oscilloscope Mini scope screen with the AUDIO SCOPE screen 5-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

5
SCOPE OPERATION
5-3
Spectrum scope screen (Continue)
D
Touch screen operation
When you touch the FFT scope zone or the waterfall
zone in the SPECTRUM SCOPE screen, the area
will be zoomed in. Then you touch the signal in the
zoomed area, you can directly tune your frequency to
the signal in the SPECTRUM SCOPE screen.
L
Holding down
XFC
changes the transmit frequency.
1.
Open the SPECTRUM SCOPE screen.
MENU
»
SCOPE
2.
Touch the Scope screen.
• The area around the touched point is zoomed in.
L
Touch only the FFT scope zone or Waterfall zone.
3.
Touch the signal in the zoomed area.
In±ormation
L
• In the Center mode, the operating frequency
changes to the touched point, and the point moves to
the screen center.
• In the Fixed mode, the operating frequency and
marker change to the touched point.
• Touch out of the zoomed area to close the zoomed
window.
D
Mini scope screen
The Mini scope screen can be simultaneously displayed
with another function displays, such as the RTTY
DECODE screen and the AUDIO SCOPE screen.
Push
M.SCOPE
to turn the Mini scope screen ON or OFF.
L
Hold down
M.SCOPE
for 1 second to display the
SPECTRUM SCOPE screen.
Mini scope screen with the AUDIO SCOPE screen
Audio scope screen
This audio scope enables you to display the received
signal’s frequency component on the FFT scope, and
its waveform components on the Oscilloscope. The
FFT scope also has an waterfall.
1.
Open the AUDIO SCOPE screen.
MENU
»
AUDIO
Key
Action
ATT
Touch
Selects the attenuator for the
FFT scope.
• 0 (OFF), 10, 20, or 30 dB
Touch for
1 second
Turns OFF the attenuator. (0 dB)
HOLD
Sets the Hold function to ON or OFF.
• “
HOLD
” is displayed and freezes the
current audio spectrum.
LEVEL
Selects the Oscilloscope level.
• 0, –10, –20, or –30 dB
TIME
Selects the Oscilloscope sweep time.
• 1, 3, 10, 30, 100, or 300 ms/Div
EXPD/
SET
Touch
Selects the Expanded or Normal
screen.
Touch for
1 second
Enters the AUDIO SCOPE SET
screen.
2.
To exit the AUDIO SCOPE screen, push
EXIT
.
AUDIO SCOPE screen
Oscilloscope
Waterfall zone
FFT Scope zone
• AUDIO SCOPE screen