Icom IC-M412 Instruction Manual - Page 14
U.S.A., international and Canadian channels
View all Icom IC-M412 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3 BASIC OPERATION n Channel selection (Continued) ï U.S.A., international and Canadian channels The transceiver is pre-programmed with 57 USA, 57 international and 61 Canadian channels. These channel groups may be specified for the operating area. q Push [CH/WX] to select a regular channel. • If a weather channel appears, push [CH/WX] again. w Push [U/I/C] (both [Y] and [Z]) to change the channel group. • USA, International and Canadian channel groups can be selected in sequence. ï Weather channels The transceiver has 10 weather channels. These are used for monitoring broadcasts from NOAA (National Oceanic and Atmospheric Administration.) The transceiver can detect a weather alert tone on the selected weather channel while receiving, in the stand-by mode on a regular channel, or while scanning. (p. 11) q Push [CH/WX] once or twice to select a weather channel. • "WX" appears when a weather channel is selected. • "WX ALT" appears when the Weather Alert function is in use. (p. 45) Push once or twice Push (both and ) When the Weather alert is OFF. Scrolls Appears e Push [Y] or [Z] to select a channel. • "DUP" appears for duplex channels. • " " appears when a simplex channel is selected. 6 Scrolls Appears When the Weather alert is ON. w Push [Y] or [Z] to select a channel.