Icom IC-M412 Instruction Manual - Page 8
Precautions
View all Icom IC-M412 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
PRECAUTIONS RWARNING! NEVER connect the transceiver to an AC outlet. This may pose a fire hazard or result in an electric shock. RWARNING! NEVER connect the transceiver to a power source of more than 16 V DC or use reverse polarity. This will could cause a fire the transceiver. RWARNING! NEVER cut the DC power cable between the DC plug at the back of the transceiver and fuse holder. If an incorrect connection is made after cutting, the transceiver may be damaged. CAUTION: NEVER place the transceiver where normal operation of the vessel may be hindered or where it could cause bodily injury. KEEP the transceiver and microphone at least 1 meter (3.3 feet) away from your vessel's magnetic navigation compass. DO NOT use or place the transceiver in areas with tem- peratures below -20°C (-4°F) or above +60°C (+140°F), or in areas subject to direct sunlight, such as the dashboard. DO NOT use harsh solvents such as benzine or alcohol to clean the transceiver, as they will damage the transceiver's surfaces. If the transceiver becomes dusty or dirty, wipe it clean with a soft, dry cloth. BE CAREFUL! The transceiver rear panel will become hot when operating continuously for long periods of time. Place the transceiver in a secure place to avoid inadvertent use by children BE CAREFUL! The transceiver meets IPX7* requirements for waterproof protection. However, once the transceiver has been dropped, waterproof protection cannot be guaranteed because of possible damage to the transceiver's case or the waterproof seal. * Except for the DC power and other cables. vii