Icom IC-M412 Instruction Manual - Page 30

6 DSC OPERATION n Transmitting DSC calls D Transmitting an Individual call (Continued) e Push [Y] or [Z] to select a desired pre-programmed Indi- vidual address or "MANUAL INPUT," then push [ENT]. • The ID code for the individual can be set in advance. (p. 14) • W hen "MANUAL INPUT" is selected, set the 9-digit MMSI ID code for the individual you wish to call with [Y] or [Z]. (See About Manual Inputting at the right column.) r Push [Y] or [Z] to select a desired intership channel, then push [ENT]. • Intership channels are already preset into the transceiver in preferred order. • After pushing [ENT], Channel 70 is automatically selected and "READY" appears in the channel comment display. Scrolls Push About Manual Inputting: Push [Y] or [Z] to input the 9-digit Individual ID, then push [ENT]. • Push [CH/WX] or [16] to move the cursor forward or backward. • Push [CLR] to cancel and exit the entry, if desired. • Go to the next step after pushing [ENT]. Push / t Push [ENT] to transmit the Individual call. • If Channel 70 is busy, the transceiver stands by until the channel becomes clear. • Routine category only is available. Transmitting 22