Icom IC-M412 Instruction Manual - Page 59

Optional MB-69 installation - flush mount

Get Icom IC-M412 PDF manuals and user guides View all Icom IC-M412 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

8 CONNECTIONS AND MAINTENANCE n Optional MB-69 installation An optional MB-69 flush mount is available for mounting the transceiver to a flat surface, such as an instrument panel. KEEP the transceiver and microphone at least 1 meter (3.3 feet) away from your vessel's magnetic navigation compass. q Using the template on page 55, carefully cut a hole into the instrument panel (or wherever you plan to mount the transceiver.) w Slide the transceiver through the hole as shown below. 1 2 e Attach the clamps on either side of the transceiver with two supplied bolts (5 × 8 mm). 3 • Make sure that the clamps align parallel to the transceiver body. 4 5 6 7 8 9 r Tighten the end bolts on the clamps (rotate clockwise) so 10 that the clamps press firmly against the inside of the in- strument control panel. 11 t Tighten the locking nuts (rotate counterclockwise) so that the transceiver is securely mounted in position, as shown 12 below. 13 y Connect the antenna and power cable, then return the instrument control panel to its original place. 14 15 16 t r 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
51
8
CONNECTIONS AND MAINTENANCE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
n
Optional MB-69 installation
An optional MB-69
FLUSH
MOUNT
is available for mounting
the transceiver to a flat surface, such as an instrument panel.
KEEP
the transceiver and microphone at least 1 meter
(3.3 feet) away from your vessel’s magnetic navigation
compass.
q
Using the template on page 55, carefully cut a hole into
the instrument panel (or wherever you plan to mount the
transceiver.)
w
Slide the transceiver through the hole as shown below.
e
Attach the clamps on either side of the transceiver with
two supplied bolts (5
×
8 mm).
• Make sure that the clamps align parallel to the transceiver body.
r
Tighten the end bolts on the clamps (rotate clockwise) so
that the clamps press firmly against the inside of the in-
strument control panel.
t
Tighten the locking nuts (rotate counterclockwise) so that
the transceiver is securely mounted in position, as shown
below.
y
Connect the antenna and power cable, then return the
instrument control panel to its original place.
t
r