Insignia NS-STR514 User Manual (English) - Page 15

Insignia NS-STR514 Stereo Receiver with Bluetooth Recording an audio source 1 Select the recording input source by pressing the appropriate button on the remote control. 2 Start recording on the AUX 1 or AUX 2 device, as appropriate. 3 Start playback on your input device to provide the audio signal to record. Using the sleep timer The sleep timer automatically turns the receiver off after a specified period of time. • Press the SLEEP button on the remote control to specify the amount of time you want the receiver to play. Using a Bluetooth device You can enjoy music wirelessly, through your receiver, from Bluetooth audio devices such as an MP3 player or a mobile phone. Connecting to a Bluetooth device Note Place the device within 30 ft. (10 m) of your receiver. 1 Select BT AUDIO as the input source by pressing: • The BLUETOOTH button on the remote control. -OR• The INPUT button on the receiver repeatedly until BT AUDIO is shown on the display. PAIRING will be shown on the display and the Bluetooth indicator will blink. OR Each time this button is pressed, the time changes as follows: • 10 minutes>20 minutes>30 minutes>60 minutes>90 minutes>OFF Note While operating the sleep timer, the the display. lights up on Adjusting the display brightness • Press the DIMMER button to set the brightness of the display. 2 Navigate to your device's Bluetooth settings, turn on Bluetooth, then search for available devices. PAIRING will be shown on the display and the Bluetooth indicator will blink. a. For iPad/iPhone/iPod touch: i. From the home page, touch Settings > General > Bluetooth. b. For Android Phone/Tablet: i. From your smart phone/tablet home page, touch Settings >Wireless and networks. ii. Touch to activate Bluetooth, then touch Bluetooth settings. c. For a PC or Mac, you can find these instructions in the documentation that came with your computer or operating system. 3 On your Bluetooth device, select "NS-STR514" from the device list. Repeat step 2 if "NS-STR514" is not displayed. 4 If a PIN code is requested, enter "0000." Each time this button is pressed, the brightness changes as follows: • ON>Dimmer>OFF Note If the display is off, pressing any button turns the display on. www.insigniaproducts.com 13