Insignia NS-STR514 User Manual (English) - Page 8
Connecting devices - turns off
View all Insignia NS-STR514 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Positioning your receiver Your receiver requires space for ventilation. For best performance: • Do not install your receiver in an enclosed area. • Do not block the ventilation openings on your receiver. • Do not place anything on top of your receiver. • Make sure that you allow 8 in. (20 cm) of space around both sides and the back of your receiver and 16 in. (40 cm) above your receiver for correct ventilation. Front view 8 in. (20 cm) 16 in. (40 cm) Side view Back of receiver 8 in. (20 cm) Caution Connect the AC cord only after the speakers, antenna, and all optional equipment have been connected. Never make or change any connections with the power turned on. Connecting devices Notes Be sure to observe the color coding when connecting audio and speaker cords. Make connections firmly and correctly. Failure to do this can cause loss of sound, add noise to the sound, or damage your receiver. Connecting an antenna Connecting an indoor FM antenna 1 Connect the indoor FM antenna (included) to the FM jack on the back of the receiver. Back panel Insignia NS-STR514 Stereo Receiver with Bluetooth 2 Move the antenna until you get the best reception of your favorite FM stations. Note To improve reception, you may use a 75 Ω outdoor antenna instead of an indoor antenna. Disconnect the indoor antenna before replacing it with an outdoor antenna. Connecting an indoor AM antenna 1 Assemble the AM antenna. 2 Press the GND and AM Loop levers, insert the ends of the wires, then release the levers. Make sure that only the bare, stripped wire is inserted in the jack. Back panel Indoor AM antenna 3 Locate the AM antenna as far as possible from the receiver, TVs, speaker cords, and the AC power cord. Move the antenna until you get the best reception of your favorite AM stations. Note To improve reception, you may use an outdoor AM antenna instead of a loop AM antenna. Disconnect the indoor antenna before replacing it with an outdoor antenna. 6 www.insigniaproducts.com