Insignia NS-STR514 User Manual (English) - Page 9

Insignia NS-STR514 Stereo Receiver with Bluetooth Connecting speakers Caution • • • We recommend that you use speakers with an impedance of 8 Ohms or more. Do not let the bare speaker wires touch each other or any metal part of this receiver. Doing so may damage the receiver or speaker. Do not touch the speaker wire terminals while the AC power cord is plugged in. Doing so could result in an electric shock. 1 Strip away approximately 3/8" (10 mm) of insulation from each speaker wire and tightly twist the end together. If the sound is unnatural and lacks bass, the speaker polarity is incorrect. Right Left Speaker A Back panel Speaker B Right Left 2 Loosen each speaker terminal on the back of the stereo receiver by turning it counterclockwise. Connecting audio-only devices Back panel 3 Insert the bare wire into the terminal, then tighten the terminal cap to securely connect it. Make sure that none of the wire insulation is under the terminal. 4 Make sure cables are secure by lightly pulling on them. Note If you have only one pair of speakers, connect them to the SPEAKER A terminals. Connect speakers by matching the channel (left and right) and polarity (+ and -). If the connections are not correct, you will not hear any sounds from the speakers. CD player TV Front panel 3.5 mm audio cable (not included) MP3 player, smartphone, etc. Connecting devices with video 1 Connect the cable from the L/R AUDIO OUT jacks on the audio device to the L/R AUX IN (1 or 2) jacks on the receiver. www.insigniaproducts.com 7