Insignia NS-STR514 User Manual (English) - Page 17

Insignia NS-STR514 Stereo Receiver with Bluetooth Problem Solutions • Memorize the correct station frequency. Preset stations • Memorize the stations again. cannot be received. • Connect an antenna. • Change the position of the antenna. Continuous or intermittent noise. • Move devices, such as a TV or other appliance away from the receiver or turn them off. • Change the position of the antenna. • Install an outdoor AM or FM antenna. • Make sure that the antenna is properly secured. • Make sure that you are tuned to the correct frequency. No recording. • Make sure that all devices are connected correctly. • Operate each component correctly. • Select the correct input source. The sound lacks • Check all speakers for correct polarity. bass. • Adjust the bass. The volume of SPEAKER A is different from that of SPEAKER B. • Connect the same type of speakers to the SPEAKERS A and B terminals if you want to use SPEAKERS A and B at the same time with the same volume. • Adjust the balance control. I can hear the audio, but I can't see the video on my TV. • Select the input source that matches the device connected to the TV. Remote control isn't • Replace the batteries. working. • Remove the obstacles, such as furniture, between the remote control and sensor on the receiver. The display is too • Press DIMMER on the control panel repeatedly to return to the dark or is off. default setting. No sound or low volume in Bluetooth mode • • Make sure that your Bluetooth device turned on, Bluetooth is turned on, and "NS-STR514" is selected. Turn up the volume on your receiver. • Turn up the volume on your Bluetooth device. • Make sure that your Bluetooth device is not muted. • Make sure that you are playing music from your Bluetooth device. • Make sure that you have selected the Bluetooth source on your receiver. • Make sure that your receiver is not paired to another Bluetooth device. • Make sure that your Bluetooth device is not paired to another Bluetooth device. Cannot establish Bluetooth connection • Shorten the distance between your receiver and your Bluetooth device. • Turn your devices off, then on. Re-pair your receiver and your Bluetooth device. • Make sure that your receiver is not paired to another Bluetooth device. • Make sure that your receiver and Bluetooth device are both in pairing mode. • Make sure that your Bluetooth device is not connected to any other device. • Make sure that you have selected "NS-STR514" on your Bluetooth device. My Bluetooth device keeps unpairing • Shorten the distance between your receiver and your Bluetooth device. • If battery on your Bluetooth device is low, recharge the battery. "NS-STR514" does not appear on my Bluetooth device • Shorten the distance between your receiver and your Bluetooth device. • Put your receiver into pairing mode, then refresh your list of Bluetooth devices. For more information, see the documentation that came with your Bluetooth device. Specifications Notes • • • Design and specifications are subject to change without notice. Weight and dimensions shown are approximate. Specifications and external appearance may be changed for the sake of improvement. Audio Power output: Input sensitivity/impedance (CD): Signal to noise ratio (CD): Frequency response (CD): Bass/Treble control: FM Tuner Tuning frequency range: Usable sensitivity, S/N 30 dB: Signal to noise ratio, mono/stereo: Distortion, mono/stereo: Stereo separation: IF rejection: Image rejection: AM Tuner Tuning frequency range: Usable sensitivity (S/N = 20 dB): Signal to noise ratio: Selectivity (±10 kHz): IF rejection: General Power supply: Power consumption: Dimensions : (W×H×D, including protruding parts) Weight (Net): Stereo mode, 8 Ohms (Ω), THD 1%, 40 Hz~20 kHz: 2×100 W 420 mV 47 k ohms 95 dB 20 Hz~100 kHz: +/- 3 dB ±10 dB 87.5~107.9 MHz 12 dBu 55/50 dBu 0.7/ 1% 30 dBu @ 1kHz 65 dB 20 dB 530~1710 kHz 63 dBu/m 35 dB 23 dB 40 dB 120 V ~ 60 Hz 230W 17.3 × 5.6 × 14.9 in. (44 × 14.1 × 37.8 cm) 17 lbs (7.7 kg) www.insigniaproducts.com 15