Intel D925XECV2 English Manual Product Guide - Page 30
Installing and Removing a Processor
View all Intel D925XECV2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Intel Desktop Board D925XECV2/D925XEBC2 Product Guide Installing and Removing a Processor Instructions on how to install the processor to the desktop board are given below. Installing a Processor CAUTION Before installing or removing the processor, make sure that AC power has been removed by unplugging the power cord from the computer; the standby power LED should not be lit (see Figure 3 on page 22). Failure to do so could damage the processor and the board. To install a processor, follow these instructions: 1. Observe the precautions in "Before You Begin" on page 25. 2. Open the socket lever by pushing the lever down and away from the socket (see Figure 6, A and B). B A Figure 6. Lift Socket Lever 3. Lift the load plate. Do not touch the socket contacts (see Figure 7, C and D). C D D Figure 7. Lift the Load Plate and Don't Touch the Socket Contacts 30