Intel D925XECV2 English Manual Product Guide - Page 38

Removing DIMMs

Get Intel D925XECV2 PDF manuals and user guides View all Intel D925XECV2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Intel Desktop Board D925XECV2/D925XEBC2 Product Guide 5. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position. 6. Holding the DIMM by the edges, remove it from its anti-static package. 7. Position the DIMM above the socket. Align the small notch at the bottom edge of the DIMM with the keys in the socket (see inset in Figure 17). 8. Insert the bottom edge of the DIMM into the socket. 9. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips snap into place. Make sure the clips are firmly in place. 10. Reinstall the PCI Express x16 card if it was removed prior to installing the DIMMs. 11. Replace the computer's cover and reconnect the AC power cord. Removing DIMMs To remove a memory module, follow these steps: 1. Observe the precautions in "Before You Begin" on page 25. 2. Turn off all peripheral devices connected to the computer. Turn off the computer. 3. Remove the AC power cord from the computer. 4. Remove the computer's cover. 5. Remove the PCI Express x16 card if it interferes with the DIMM clips from being easily opened and closed. 6. Gently spread the retaining clips at each end of the DIMM socket. The DIMM pops out of the socket. 7. Hold the DIMM by the edges, lift it away from the socket, and store it in an anti-static package. 8. Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets. 9. Replace the computer's cover and reconnect the AC power cord. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
Intel Desktop Board D925XECV2/D925XEBC2 Product Guide
38
5.
Make sure the clips at either end of the DIMM socket(s) are pushed outward to the
open position.
6.
Holding the DIMM by the edges, remove it from its anti-static package.
7.
Position the DIMM above the socket.
Align the small notch at the bottom edge of the DIMM
with the keys in the socket (see inset in Figure 17).
8.
Insert the bottom edge of the DIMM into the socket.
9.
When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips
snap into place.
Make sure the clips are firmly in place.
10.
Reinstall the PCI Express x16 card if it was removed prior to installing the DIMMs.
11.
Replace the computer’s cover and reconnect the AC power cord.
Removing DIMMs
To remove a memory module, follow these steps:
1.
Observe the precautions in "Before You Begin" on page 25.
2.
Turn off all peripheral devices connected to the computer.
Turn off the computer.
3.
Remove the AC power cord from the computer.
4.
Remove the computer’s cover.
5.
Remove the PCI Express x16 card if it interferes with the DIMM clips from being easily
opened and closed.
6.
Gently spread the retaining clips at each end of the DIMM socket.
The DIMM pops out of
the socket.
7.
Hold the DIMM by the edges, lift it away from the socket, and store it in an anti-static package.
8.
Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets.
9.
Replace the computer’s cover and reconnect the AC power cord.