Intel DN2800MT Technical Product Specification for Intel Desktop Board DN2800M - Page 64
Jumper Block - mini itx
View all Intel DN2800MT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Intel Desktop Board DN2800MT Technical Product Specification Figure 19. Standard-Height Back Panel I/O Shield For more information about Thin mini-ITX form factor Refer to http://www.formfactors.org/developer%5Cspecs%5CMini_ITX_ Spec_V2_0.pdf 2.4 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 20 shows the location of the jumper block. The 3-pin jumper block determines the BIOS Setup program's mode. Table 38 describes the jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. 64