Intel DN2800MT Technical Product Specification for Intel Desktop Board DN2800M - Page 66
Mechanical Considerations
View all Intel DN2800MT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Intel Desktop Board DN2800MT Technical Product Specification 2.5 Mechanical Considerations 2.5.1 Form Factor The board is designed to fit into a Mini-ITX form-factor chassis. Figure 21 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 6.7 inches by 6.7 inches [170.18 millimeters by 170.18 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the ATX specification. NOTE The board is designed to have a total height of less than 20 mm from the underside of the board to the top of its tallest components, including all back panel I/O ports, internal connectors, installed system memory, and factory-installed thermal solutions, in compliance with thin mini-ITX requirements per version 2 of the Mini-ITX Addendum to the microATX Motherboard Interface Specification. For more information about Thin mini-ITX form factor Refer to http://www.formfactors.org/developer%5Cspecs%5CMini_ITX_ Spec_V2_0.pdf 66