Invacare 3GTQSPBASE Owners Manual - Page 103
Replacing Battery Box Retaining Strap - 22NF Battery Base Frames
View all Invacare 3GTQSPBASE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
8.12 Replacing Battery Box Retaining Strap - 22NF Battery Base Frames 8 SETUP/MAINTENANCE For this procedure, refer to FIGURE 9. 1. Remove the battery box. Refer to Removing/Installing the 22NF Battery Box on page 92. Tray shown by itself for clarity. There is no need to remove the tray from the wheelchair if the strap is being replaced. ƽ WARNING The retaining strap MUST be fed through the adjustable end of the battery box retaining strap clip as shown in FIGURE 9. 2. Feed the battery box retaining strap through the adjustable end of the battery box retaining strap clip. 3. Feed the battery box retaining strap through the slots in the battery box tray. Retaining Strap Retaining Strap Clip Retaining Strap The folded over portion of the retaining strap stops at the slot. DO NOT try to force the folded over section through the slot. 4. Install the new battery box retaining strap by reversing STEPS 2 and 3. 5. Reinstall the battery box. Refer to Removing/Installing the 22NF Slot Battery Box on page 92. ƽ WARNING The Battery Box Retaining Strap MUST be fastened securely in place before using the wheelchair. Battery Box Tray Slot Folded Over Portion of Retaining Strap FIGURE 9 Replacing Battery Box Retaining Strap - 22NF Battery Base Frames Part No 1143151 103 Invacare 3G Storm Series®