Invacare 3GTQSPBASE Owners Manual - Page 91

8 SETUP/MAINTENANCE Installing 1. Place the wheelchair in a well ventilated area where work can be performed without risking damage to carpeting or floor covering. 2. Verify the joystick On/Off switch is in the Off position. 3. Secure the battery box carrying strap to the lid of the two connector battery box. 4. Place two connector battery box onto the battery sub-frame assembly with guide pins facing the inside of the wheelchair. 5. Slide the two connector battery box along the sub-frame until its guide pins are engaged in the sub-frame connector.  Visually inspect to ensure the connection is properly made. Connectors MUST be fully engaged. Make certain that the battery box carrying strap is positioned on top of the battery box and will not interfere with the one battery box guide pins when engaging the connector on the one battery box lid. 6. Secure the battery box carrying strap to the lid of the one connector battery box. 7. Place one connector battery box onto battery sub-frame. 8. Slide one connector battery box along the sub-frame until its guide pins are engaged in the connector of the two connector battery box.  Visually inspect to ensure the connection is properly made. Connectors MUST be fully engaged. ƽ CAUTION The battery retainer assembly MUST be locked securely to hold the battery boxes firmly in place or battery box connectors may be damaged causing erratic wheelchair operation. 9. Pull the battery box retainer down over the end of the one connector battery box until it is securely clipped (locked) into place. Part No 1143151 91 Invacare 3G Storm Series®