Invacare IOH200 Owners Manual - Page 16

Usage

Page 16 highlights

Invacare® HomeFill® Oxygen System 4 Usage 4.1 Compressor Operation Checklist Each time the HomeFill Compressor is used to fill a cylinder, complete the following checklist: q Ensure the concentrator has been On for at least thirty minutes. Refer to the concentrator User Manual. q Perform the prefill inspection on the cylinder. q Connect the cylinder to the compressor. q Push the compressor power switch to the On ( I ) position. q Examine the indicator lights on the control panel. q Disconnect and remove the full cylinder. q Push the compressor power switch to the Off (O) position. q If filling another cylinder, repeat this checklist. 4.2 Cylinder Prefill Inspection WARNING! - ONLY use cylinders that have the Invacare HomeFill connection and HomeFill label. - All cylinders MUST be inspected before attempting to fill. Otherwise, injury or damage may occur. To identify a HomeFill compatible cylinder A, look for a black stripe B in the green area C on the top of the cylinder and look for the HomeFill label D. 16 1100873-N

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Invacare® HomeFill® Oxygen System
4
Usage
4.1
Compressor Operation Checklist
Each time the HomeFill Compressor is used to fill a cylinder,
complete the following checklist:
q
Ensure the concentrator has been On for at least thirty
minutes. Refer to the concentrator User Manual.
q
Perform the prefill inspection on the cylinder.
q
Connect the cylinder to the compressor.
q
Push the compressor power switch to the On ( I )
position.
q
Examine the indicator lights on the control panel.
q
Disconnect and remove the full cylinder.
q
Push the compressor power switch to the Off (O)
position.
q
If filling another cylinder, repeat this checklist.
4.2
Cylinder Prefill Inspection
WARNING!
– ONLY use cylinders that have the Invacare
HomeFill connection and HomeFill label.
– All cylinders MUST be inspected before
attempting to fill. Otherwise, injury or damage
may occur.
To identify a HomeFill compatible cylinder
A
, look for a
black stripe
B
in the green area
C
on the top of the
cylinder and look for the HomeFill label
D
.
16
1100873-N