Invacare IOH200 Owners Manual - Page 28

Problem, Solution

Get Invacare IOH200 PDF manuals and user guides View all Invacare IOH200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Invacare® HomeFill® Oxygen System 7.2 Troubleshooting Problem No indicator lights on when compressor turned On. RED Light On 28 Solution 1. Turn compressor Off. 2. Check that power cord is properly plugged into compressor and wall outlet. 3. Turn the compressor On. 4. Clean air filters. Refer to 5.4 Cleaning the Compressor Filter, page 22. 5. If performing Steps 1-4 does not cause any indicator lights to come on, contact your home health care provider or Invacare for service. 1. Check the cylinder gauge to see if it is full: • Cylinder full - Remove the cylinder and turn the unit Off. Perform the 4.2 Cylinder Prefill Inspection, page 16 with a cylinder that is not full. • Cylinder not full - Proceed to Step 2. 2. Check that the cylinder is connected properly. 3. Turn the compressor Off. 4. Remove the cylinder and reinstall. 5. Turn the compressor On. If cylinder is not full and is connected properly, the compressor may have internal failure. Contact your home health care provider or Invacare. 1100873-N

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Invacare® HomeFill® Oxygen System
7.2
Troubleshooting
Problem
Solution
No indicator lights on when compressor turned On.
1. Turn compressor Off.
2. Check that power cord is properly plugged into compressor
and wall outlet.
3. Turn the compressor On.
4. Clean air filters. Refer to
5.4 Cleaning the Compressor
Filter, page 22
.
5. If performing Steps 1-4 does not cause any indicator
lights to come on, contact your home health care provider
or Invacare for service.
RED Light On
1. Check the cylinder gauge to see if it is full:
• Cylinder full - Remove the cylinder and turn the unit Off.
Perform the
4.2 Cylinder Prefill Inspection, page 16
with a
cylinder that is not full.
• Cylinder not full - Proceed to Step 2.
2. Check that the cylinder is connected properly.
3. Turn the compressor Off.
4. Remove the cylinder and reinstall.
5. Turn the compressor On. If cylinder is not full and is
connected properly, the compressor may have internal failure.
Contact your home health care provider or Invacare.
28
1100873-N