Invacare TDXSR-CG-HD Owners Manual - Page 86

Installing Batteries into Wheelchair

Get Invacare TDXSR-CG-HD PDF manuals and user guides View all Invacare TDXSR-CG-HD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

7 SETUP/MAINTENANCE Installing Batteries into Wheelchair  For this procedure, refer to FIGURE 2 on page 85 and FIGURE 3 on page 87. Positioning of the batteries into the battery tray is completed with battery tray positioned in wheelchair and partially pulled out. Refer to FIGURE 2 for full view of wheelchair base. Illustrations in FIGURE 3 on page 87 are shown without the wheelchair for clarification purposes only. 1. Position the battery with battery connector bracket in the rear of the battery tray in the orientation as shown. See Detail "A" of FIGURE 3 on page 87.  Front of battery tray is designated by the battery stop. Rear of the battery tray is the opposite end. Orientation of the battery is critical otherwise batteries will not connect to the controller or each other. 2. Position the remaining battery in the front of the battery tray in the orientation shown so that the wiring harnesses can be connected together. See Detail "B" of FIGURE 3 on page 87. 3. Connect front battery to rear battery. See Detail "B" of FIGURE 3 on page 87. 4. Connect battery straps. See Detail "C" of FIGURE 3 on page 87. 5. Slide the battery tray into the wheelchair (FIGURE 2). 6. Install the battery door and rear shroud. Refer to Installing the Front Shroud/Battery Retention Bracket and Rear Shroud on page 88. Invacare® TDX®SP, TDX SR 86 Part No 1143190

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
7
SETUP/MAINTENANCE
Invacare® TDX®SP, TDX SR
86
Part No 1143190
Installing Batteries into Wheelchair
1.
Position the battery with battery connector bracket in the rear of the battery tray in the orientation as shown. See Detail “A” of FIGURE 3 on
page 87
.
2.
Position the remaining battery in the front of the battery tray in the orientation shown so that the wiring harnesses can be connected together.
See Detail “B” of FIGURE 3 on page 87.
3.
Connect front battery to rear battery. See Detail “B” of FIGURE 3 on page 87.
4.
Connect battery straps. See Detail “C” of FIGURE 3 on page 87.
5.
Slide the battery tray into the wheelchair (FIGURE 2).
6.
Install the battery door and rear shroud. Refer to Installing the Front Shroud/Battery Retention Bracket and Rear Shroud
on page 88.
For this procedure, refer to FIGURE 2 on page 85 and FIGURE 3 on page 87.
Positioning of the batteries into the battery tray is completed with battery tray positioned in wheelchair and partially pulled
out. Refer to FIGURE 2 for full view of wheelchair base. Illustrations in FIGURE 3 on page 87 are shown without the
wheelchair for clarification purposes only.
Front of battery tray is designated by the battery stop. Rear of the battery tray is the opposite end.
Orientation of the battery is critical otherwise batteries will not connect to the controller or each other.