Invacare TDXSR-CG-HD Owners Manual - Page 96

Van Seats

Get Invacare TDXSR-CG-HD PDF manuals and user guides View all Invacare TDXSR-CG-HD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 96 highlights

7 SETUP/MAINTENANCE Van Seats  For this procedure, refer to FIGURE 9. Take note of the position and orientation of mounting hardware for reinstalling the joystick assembly. 1. Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket. 2. Remove the joystick mounting tube from the wheelchair. 3. Remove the three hex mounting screws, bushings and locknuts that secure the mounting bracket to the three mounting holes on the armrest plate.  The mounting bracket is mounted to the inside of the armrest plate. 4. Reposition the mounting bracket on the opposite armrest plate. 5. Using the three hex mounting screws, bushings and locknuts secure the mounting bracket to the three mounting holes of the armrest plate. 6. If necessary, perform the following to reposition the adjustment lock: A. Slide the adjustment lock from the mounting bracket. B. Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the mounting bracket. 7. Slide joystick mounting tube through the mounting bracket to the desired position and secure adjustment lock to tube by turning lever on adjustment lock. Armrest Plate Mounting Bracket Bushings Hex Mounting Screws  Adjustment Lock Lever Joystick Mounting Tube Joystick not shown. Locknuts FIGURE 9 Repositioning Joystick - Van Seats Invacare® TDX®SP, TDX SR 96 Part No 1143190

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
7
SETUP/MAINTENANCE
Invacare® TDX®SP, TDX SR
96
Part No 1143190
Van Seats
1.
Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket.
2.
Remove the joystick mounting tube from the wheelchair.
3.
Remove the three hex mounting screws, bushings and locknuts that secure the mounting bracket to the three mounting holes on the armrest
plate.
4.
Reposition the mounting bracket on the opposite armrest plate.
5.
Using the three hex mounting screws, bushings and locknuts secure the mounting bracket to the three mounting holes of the armrest plate.
6.
If necessary, perform the following to reposition the adjustment lock:
A.
Slide the adjustment lock from the mounting bracket.
B.
Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the mounting bracket.
7.
Slide joystick mounting tube through the mounting bracket to the desired position and secure adjustment lock to tube by turning lever on
adjustment lock.
FIGURE 9
Repositioning Joystick - Van Seats
For this procedure, refer to FIGURE 9.
Take note of the position and orientation of mounting hardware for reinstalling the joystick assembly.
The mounting bracket is mounted to the inside of the armrest plate.
Locknuts
Bushings
Armrest
Plate
Mounting Bracket
Hex Mounting Screws
Adjustment
Lock Lever
Joystick Mounting Tube
Joystick not shown.