Invacare TDXSR-CG-HD Owners Manual - Page 98

MPJ+ Joysticks

Get Invacare TDXSR-CG-HD PDF manuals and user guides View all Invacare TDXSR-CG-HD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 98 highlights

7 SETUP/MAINTENANCE MPJ+ Joysticks  For this procedure, refer to FIGURE 11. Disconnecting 1. Pull the latch away from the joystick connector. 2. Disconnect the joystick connector from the remaining connectors Connecting  Ensure the gaskets are installed in the top connector cap and between network connectors. 1. Ensure the latch is pulled away from the network connector. 2. Connect the network connector to the other connectors. 3. Top and Bottom Connectors - Install connector caps onto the network connector. 4. Push the latch in to secure the network connectors and caps. 5. If necessary secure excess cable using tie-wraps. Top Connector Cap Network Connectors Latch Gasket Controller Cable Gasket Bottom Connector Cap Gasket FIGURE 11 Disconnecting/Connecting the Joysticks - MPJ+ Joysticks Invacare® TDX®SP, TDX SR 98 Part No 1143190

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
7
SETUP/MAINTENANCE
Invacare® TDX®SP, TDX SR
98
Part No 1143190
MPJ+ Joysticks
Disconnecting
1.
Pull the latch away from the joystick connector.
2.
Disconnect the joystick connector from the remaining connectors
Connecting
1.
Ensure the latch is pulled away from the network connector.
2.
Connect the network connector to the other connectors.
3.
Top and Bottom Connectors - Install connector caps onto the
network connector.
4.
Push the latch in to secure the network connectors and caps.
5.
If necessary secure excess cable using tie-wraps.
FIGURE 11
Disconnecting/Connecting the Joysticks - MPJ+
Joysticks
For this procedure, refer to FIGURE 11.
Ensure the gaskets are installed in the top
connector cap and between network connectors.
Top Connector
Cap
Latch
Gasket
Network
Connectors
Gasket
Controller
Cable
Gasket
Bottom
Connector
Cap