Iomega Ix2-200 User Guide - Page 82
Manually Configuring the Network, Automatically con DNS, WINS, and all IP addresses DHCP - default ip address
UPC - 742709347498
View all Iomega Ix2-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
82 Manually Configuring the Network You can have direct control of the network setup. Iomega StorCenter ix2-200 1. Click Modify Network Settings. 2. Uncheck Automatically configure DNS, WINS, and all IP addresses (DHCP). 3. DNS Servers - enter the IP addresses of the DNS (Domain Name System) servers. DNS is used for translating the domain name to IP addresses. 4. WINS Servers - enter the IP addresses of the WINS server. 5. Click Apply to save your settings. If a DHCP server is unavailable for a network interface card (NIC), the device could auto-assign an IP address, or you can uncheck the Automatically acquire network address (DHCP) checkbox found in the Information section of a NIC. 6. The following are settings you can change in the Information section: IP Address - the static IP address of the Iomega StorCenter ix2-200. An unused IP address from within the range used by the LAN should be used. If you are going to use Remote Access, it is recommended to use a static IP address for a NIC. Subnet Mask - the subnet that the IP address belongs to. The default value is 255.255.255.0. Gateway - the gateway IP address needs to be entered in this field. 7. Click Apply to save your settings.