JVC GZ-MG20 Instruction Manual - Page 21
Selecting a Recording Medium, Remaining Space on the Recording Media, Drop Detection, CAUTION, NOTES - hdd
View all JVC GZ-MG20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Selecting a Recording Medium Select the recording medium before starting recording or playback. (੬ pg. 48, 49) Example: When recording still images to an SD card 1 Set the power switch to or . 2 Press MENU. The menu screen appears. 3 Press / to select [REC MEDIA SETTING], DIS CAMERA SETTING then press 49. BASIC SETTING REC MEDIA SETTING DISPLAY QUALITY WIDE MODE 4 Press / to select [IMAGE MODE], then press 49. 5 Press / to select [SD], then press 49. 6 Press MENU to return to the normal screen. NO. RESET VIDEO MODE IMAGE MODE FORMAT CLEAN UP Remaining Space on the Recording Media This enables you to check the remaining space on the recording media and the available recording time for each picture quality mode. Before checking, set the recording media that you want to check in [REC MEDIA SETTING]. (੬ pg. 48, 49) Example: When checking the HDD space 1 Set the power switch to . 2 Press INFO/ . The MAX RECORDING TIME MAX RECORDING TIME screen appears. Displayed picture FREE quality mode USED : ULTRA FINE : FINE : NORMAL : ECONOMY For details on the picture quality, see page 50. To return to the normal screen Press INFO/ repeatedly. GETTING STARTED EN 21 Drop Detection This function turns off the power automatically to prevent HDD damage when the camera is accidentally dropped. This function is set to on at time of shipment. If the power is turned off due to the drop detection function, set the power switch to OFF, and turn the power on again. To turn off this function Set [DROP DETECTION] to [OFF]. The indicator appears. (੬ pg. 49) CAUTION: Setting this function to off increases the chances of damaging the internal hard disk if the camera is accidentally dropped. NOTES: ● This function cannot protect the hard disk every single time it is dropped. ● The indicator is only displayed when this function is set to [OFF]. For normal use, set this function to [ON]. ● If the drop detection function operates when the camera has not been dropped, set the function to [OFF] to continue use. ● If a drop is detected during shooting, the file being shot when the camera was dropped may be saved in the [EXTMOV] folder. (੬ pg. 22) GETTING STARTED